Troubleshooting
54
6
Other Printing Problems
Problem
Action
It takes a long time for the printer to start
printing.
The machine might be in Energy Saver
mode or Low Power mode, which re-
quires more time for warming up and re-
suming the print job. If you can't wait,
change the settings of Low Power. Shift
Time and Low Power Timer.
It takes too much time to complete the
print job.
The data is so large or complex that it
takes time to process it.
If the Data In indicator is blinking, the
data processing is being done.
Just wait until it is finished.
Windows 95/98, NT 4.0 :
The computer doesn't recognize the in-
stalled printer options.
If connections to the printer is not bi-di-
rectional, the computer doesn't recognize
the installed printer options.
In this case specify which options you
have installed using the printer driver.
Reference
For more information on the setting
options with installing the printer
driver.
Windows 3.1x :
The printer can't send the print job.
The memory buffer might be full. Set the
Print Manager to "OFF”, or make the
time-out setting longer.
