Ricoh AP-C3, Field Service Manual, Page: 53 / 1334

Enabling VM
The following procedure basically should be done by a customer.
1. Press the [User Tools] key on the operation panel.
2. Touch the "Extended Feature Settings" button twice.
3. Touch the "Java TM Platform" line under the Startup Setting tab.
4. Touch the "Extended Feature Info" tab on the LCD.
5. Touch the " Java TM Platform " line.
6. Set "Auto Start" to "On".
7. Touch the "Exit" button.
8. Exit the "User Tools" settings.
Enabling App2Me
The following procedure basically should be done by a customer.
1. Press the [User Tools] key on the operation panel.
2. Touch the "Extended Feature Settings" button twice.
3. Touch the "App2Me" line under the Startup Setting tab.
4. Touch the "Extended Feature Info" tab on the LCD.
5. Touch the "App2Me" line.
6. Set "Auto Start" to "On".
7. Touch the "Exit" button.
8. Exit the "User Tools" settings.
Security Function Installation
The machine contains the Security function (Data Overwrite Security and HDD Encryption unit) built into
the controller board.
If you are installing a new machine, it is recommended to activate the Data Overwrite Security and HDD
Encryption unit by selecting "Format All Data" from “System Settings” on the operation panel.
• This method is recommended because there is no user data on the hard drive yet (Address Book
data, image data, etc.).
If the customer wishes to activate the Data Overwrite Security and HDD Encryption unit on a machine
that is already running, it is recommended to activate the unit by selecting "All Data" from “System
Settings” on the operation panel.
Copier Installation
51