Ricoh AP-C3, Field Service Manual, Page: 48 / 1334

3. Turn the main power switch on. The machine automatically starts the initialization procedure. The
Start button LED ( ) turns green when this procedure has finished.
4. Make copies of image samples (text, photo, and text/photo modes).
5. Do the Automatic Color Calibration process (ACC) as follows:
1). Print the ACC test pattern (User tools Maintenance ACC Start).
2). Put the printout on the exposure glass.
3). Put 10 sheets of white paper on top of the test chart.
4). Close the ARDF or the platen cover.
5). Press "Start Scanning" on the LCD panel. The machine starts the ACC.
6. Check that the sample image has been copied normally.
Settings Relevant to the Service Contract
Change the necessary settings for the following SP modes if the customer has made a service contract.
• You must select one of the counter methods (developments/prints) in accordance with the contract
( SP5-045-001).
Item SP No. Function Default
Counting
method
SP5-045-001
Specifies if the counting method used in
meter charge mode is based on
developments or prints.
"0": Developments
A3/11" x 17"
double
counting
SP5-104-001
Specifies whether the counter is doubled
for A3/11" x 17" paper. When you
have to change this setting, contact your
supervisor.
"No": Single
counting
Service Tel.
No. Setting SP5-812-001
through 004
5812-002 programs the service station
fax number. The number is printed on the
counter list when the meter charge mode
is selected. This lets the user fax the
counter data to the service station.
2. Installation
46