Ricoh AP-C3, Field Service Manual, Page: 304 / 1334

4. By-pass paper size sensor [A] ( x 1).
5. By-pass paper length sensor [B] ( x 1)
When reinstalling the by-pass paper size sensor
1. Adjust the projection [A] of the left side fence bar (it must be centered).
2. Install the by-pass paper size detection switch so that the hole [B] in this switch faces the projection
[C] of the left side fence bar.
3. Reassemble the copier.
4. Plug in and turn on the main power switch.
5. Check this switch operation with SP5803-011 (By-pass paper size < Input Check).
- Display on the LCD -
Paper Size Display Paper Size Display
A3 SEF 00001110 A5 SEF 00001011
4. Replacement and Adjustment
302