Ricoh AP-C3, Field Service Manual, Page: 120 / 1334

3. Attach the ICIB-3 [D] (copy data security board) to CN 187 [C] on the BCU ( x 1, x 2).
4. Reassemble the machine.
User Tool Setting
1. Plug in and turn on the main power switch.
2. Go into the User Tools mode, and select System Settings > Administrator Tools > Copy Data
Security Option > “On”.
3. Exit User Tools.
4. Check the operation.
• The machine will issue an SC165 error if the machine is powered on with the ICIB-3 removed
and the “Data Security for Copying “feature set to “ON”.
• When you remove this option from the machine, first set the setting to “OFF” with the user tool
before removing this board. If you forget to do this, “Data Security for Copying “feature
2. Installation
118