manualshive.com logo in svg

Ricoh Aficio SP C811DN Series, Software Manual, Page: 67 / 384

Share
Download
Ricoh Aficio SP C811DN Series Software Manual Download Page 67

If a Message Appears during Installation

Message number 58 or 34 indicates the printer driver cannot be installed using Auto Run. Install the printer
driver using [Add Printer] or [Install Printer].

For Windows 95/98/Me, Windows 2000 and Windows NT 4.0:

1.

On the Start menu, point to [Settings], and then click [Printers].

2.

Double-click the Add Printer icon.

3.

Follow the instructions in Add Printer Wizard.

• If the printer driver is on a CD-ROM, the location of the RPCS printer driver is either \DRIVERS\RPCS

\WIN9X_ME, or \DRIVERS\RPCS\WIN2K_XP. If the installer starts, click [Cancel] to quit.

For Windows XP Professional and Windows Server 2003:

1.

On the Start menu, click [Printers and Faxes].

2.

Click [Add a printer].

3.

Follow the instructions in Add Printer Wizard.

• If the printer driver is on a CD-ROM, the location of the RPCS printer driver is \DRIVERS\RPCS

\WIN2K_XP. If the installer starts, click [Cancel] to quit.

For Windows XP Home Editions:

1.

On the Start menu, click [Control Panel].

2.

Click [Printers and Other Hardware].

3.

Click [Printers and Faxes].

4.

Click [Install Printer].

5.

Follow the instructions in Add Printer Wizard.

• If the printer driver is on a CD-ROM, the location of the RPCS printer driver is \DRIVERS\RPCS

\WIN2K_XP. If the installer starts, click [Cancel] to quit.

If a Message Appears during Installation

65

1

Summary of Contents for Aficio SP C811DN Series

































































































































































































































































































































































































Reviews:

No comments