Ricoh Aficio SP 1200SF User Manual Download Page 148

Page: 148 / 196

138

Wipe the outside of the machine with a
soft cloth to remove dust.

Remove any paper that is in the paper
tray.

Wipe the inside and the outside of the
paper tray with a soft cloth to remove
dust.

Re-load the paper and put the paper tray
firmly back in the machine.

Plug the machine’s power cord back into
the electrical socket first, and reconnect
all cables and telephone line cord. Turn
on the machine.

Cleaning the scanner glass

Turn off the machine. Unplug the
telephone line cord first, disconnect all
cables and then unplug the power cord
from the electrical socket.

Lift the document cover (1).
Clean the white plastic surface (2) and
scanner glass (3) underneath it with a
soft lint-free cloth moistened with water.

In the ADF unit, clean the white bar (1)
and the scanner glass strip (2)
underneath it with a soft lint-free cloth
moistened with water.

Summary of Contents for Aficio SP 1200SF





































































































































































































Search results

Summary of Contents for Aficio SP 1200SF

Reviews:

Related manuals for Aficio SP 1200SF

Brands by name

Popular brands

Ricoh Aficio SP 1200SF, User Manual

Search results

Summary of Contents for Aficio SP 1200SF

Reviews:

Related manuals for Aficio SP 1200SF

Brands by name

Popular brands