Ricoh Aficio SP 1200SF User Manual Download Page 142

Page: 142 / 196

132

Document jams

If the document is jammed, follow the steps
below.

Note

After removing a jammed document,
check that no paper scraps are left in the
machine that could cause another jam.

Document is jammed in the top of the
ADF unit

Take out any paper from the ADF that is
not jammed.

Open the ADF cover.

Pull the jammed document out to the
left.

Close the ADF cover.

Press

Stop/Exit

Document is jammed under the
document cover

Take out any paper from the ADF that is
not jammed.

Lift the document cover.

Pull the jammed document out to the
right.

Close the document cover.

Press

Stop/Exit

Document is jammed at the output
tray

Pull the jammed document out to the
right.

Press

Stop/Exit

Summary of Contents for Aficio SP 1200SF





































































































































































































Search results

Summary of Contents for Aficio SP 1200SF

Reviews:

Related manuals for Aficio SP 1200SF

Brands by name

Popular brands

Ricoh Aficio SP 1200SF, User Manual

Search results

Summary of Contents for Aficio SP 1200SF

Reviews:

Related manuals for Aficio SP 1200SF

Brands by name

Popular brands