Ricoh Aficio MP C2500 Series Settings Manual Download Page 15

Page: 15 / 314

Connecting to the Interfaces

Turn on the main power switch of the machine.

Indicator (green)
Lights up green when the machine is connected correctly to the network.

Indicator (yellow)
Lights up yellow when 100 BASE-TX is in operation. Goes off when 10
BASE-T is in operation.

Note

❒

For details about installing the printer driver, see “Preparing the Ma-
chine”, Printer Reference.

Reference

“Turning On the Power”, About This Machine
“Preparing the Machine”, Printer Reference

Connecting to the USB Interface

Connect the USB2.0 interface cable to the USB2.0 port.

Connect the USB2.0 interface cable to the USB2.0 port.

Connect the other end to the USB2.0 port on the host computer.

AME005S

AMB013S

Downloaded From ManualsPrinter.com Manuals

Summary of Contents for Aficio MP C2500 Series



























































































































































































































































































































Search results

Summary of Contents for Aficio MP C2500 Series

Reviews:

Related manuals for Aficio MP C2500 Series

Brands by name

Popular brands

Ricoh Aficio MP C2500 Series, Settings Manual

Search results

Summary of Contents for Aficio MP C2500 Series

Reviews:

Related manuals for Aficio MP C2500 Series

Brands by name

Popular brands