Ricoh Aficio MP C2030 Security Reference Download Page 42 | Manualshive

Page: 42 / 252

Ricoh Aficio MP C2030 Security Reference Download Page 42

User Code Authentication

This is an authentication method for limiting access to functions according to a user code. The same user
code can be used by more than one user. For details about specifying user codes, see "Authentication
Information", General Settings Guide.
For details about specifying the user code for the printer driver, see Printer and Scanner Reference or the
printer driver Help.
For details about specifying the TWAIN driver user code, see the TWAIN driver Help.

• To control the use of DeskTopBinder for the delivery of files stored in the machine, select Basic

Authentication, Windows Authentication, LDAP Authentication, or Integration Server Authentication.

Specifying User Code Authentication

This can be specified by the machine administrator.

1.

Press the [User Tools/Counter] key.

2.

Select [System Settings] using [ ] or [ ], and then press the [OK] key.

3.

Select [Administrator Tools] using [ ] or [ ], and then press the [OK] key.

4.

Select [User Auth. Management] using [ ] or [ ], and then press the [OK] key.

3. Users/Authentication and Its Application

40

3

«
...
40
41
42
43
44
...
»

Summary of Contents for Aficio MP C2030





























































































































































































































































Reviews:

No comments