Ricoh Aficio MP C2030 Security Reference Download Page 202

Page: 202 / 252

Machine Administrator Settings

The machine administrator settings that can be specified are as follows:

System Settings

The following settings can be specified.

General Features

All the settings can be specified.

Tray Paper Settings

All the settings can be specified.

Timer Settings

All the settings can be specified.

Administrator Tools

The following settings can be specified.

• Display / Print Counter

Print Counter List

• Display / Clear / Print Counter per User

Print Counter List

• User Authentication Management

You can specify which authentication to use.
You can also edit the settings for each function.

• Administrator Authentication Management

Machine Management

• Program / Change Administrator

Machine Administrator
You can change the user name and the full-control user's authority.

• Key Counter Management
• Restrict Display of User Information
• Extended Security

Transfer to Fax Receiver
@Remote Service
Update Firmware
Change Firmware Structure

9. Appendix

200

Summary of Contents for Aficio MP C2030




























































































































































































































































Search results

Summary of Contents for Aficio MP C2030

Reviews:

Ricoh Aficio MP C2030, Security Reference, Page: 202 / 252

Search results

Summary of Contents for Aficio MP C2030

Reviews: