manualshive.com logo in svg

Ricoh Aficio MP C2030, Security Reference, Page: 144 / 252

Share
Download
Ricoh Aficio MP C2030 Security Reference Download Page 144

Protection Using Encryption

Establish encrypted transmission on this machine using SSL, SNMPv3, and IPsec. By encrypting transmitted
data and safeguarding the transmission route, you can prevent sent data from being intercepted, analyzed,
and tampered with.

SSL (Secure Sockets Layer) Encryption

This can be specified by the network administrator.
To protect the communication path and establish encrypted communication, create and install the device
certificate.
There are two ways of installing a device certificate: create and install a self-signed certificate using the
machine, or request a certificate from a certificate authority and install it.

SSL (Secure Sockets Layer)

BBC003S

1. To access the machine from a user's computer, request the SSL device certificate and public key.

6. Enhanced Network Security

142

6

Summary of Contents for Aficio MP C2030





























































































































































































































































Reviews:

No comments