manualshive.com logo in svg

Ricoh Aficio MP C2030, Security Reference, Page: 102 / 252

Share
Download
Ricoh Aficio MP C2030 Security Reference Download Page 102

• You can also embed pattern in a document protected by data security for copying. However, if such

a document is copied using a copier or multi-function printer with the Copy Data Security Unit, the
copy is grayed out, so the embedded pattern does not appear on the copy.

• If misdetection occurs, contact your service representative.
• If a document with embedded pattern for data security for copying is copied, faxed or scanned using

a copier or multi-function printer without the Copy Data Security Unit, the embedded pattern appears
clearly on the copy.

• If a data security for copying document is detected, the machine beeps.
• If the scanned data security for copying document is registered as a user stamp, the machine does

not beep. The file registered as a user stamp is grayed out, and no entry is added to the unauthorized
copying log.

Printing Limitations

The following is a list of limitations on printing with unauthorized copy prevention and data security for
copying.

Unauthorized copy prevention / Data security for copying

You can print using only the RPCS printer driver.
You cannot print at 200 dpi resolution.
You cannot partially embed pattern in the printed document.
You can only embed pattern that is entered in the text box of the printer driver.
Printing with embedding takes longer than normal printing.

Data security for copying Only

Select 182   257 mm / 7.2   10.1 inches or larger as the paper size.
Select a paper type of Plain or Recycled with a brightness of 70% or more.
If you select Duplex, the data security for copying function may not work properly due to printing on
the back of sheets.

Notice

1. The supplier does not guarantee that unauthorized copy prevention and data security for copying

will always work. Depending on the paper, the model of the copier or multi-function printer, and the
copier or printer settings, unauthorized copy prevention and data security for copying may not work
properly.

4. Protecting Document Data Information from Leaks

100

4

Summary of Contents for Aficio MP C2030





























































































































































































































































Reviews:

No comments