Ricoh Aficio MP 6000 Operating Instructions Manual Download

Page: 831 / 907

Other Print Operations

PDF Direct Print Properties

Setting name:

Displays the plug-in configuration name
(up to 63 single byte characters)

Change Icon...

Changes the icon displayed on the tool bar.

Printer name:

Displays a list of RPCS drivers that sup-
port PDF direct printing.

Duplex

Prints on both sides of sheets.

Layout

Prints multiple pages on a single sheet.

Punch

Punch holes in output sheets.

Staple

Staple together output sheets.

Display this dialog box before

printing

Appears in PDF direct printing mode if
this check box is selected.

Orientation:

Specifies the original's orientation.

10.

Number of copies

Specifies the number of copies to print.

11.

Collate

Sorts printed sheets.

12.

Range

Specifies the print area on each page.

13.

Resolution:

Specifies a print resolution.

14.

PDF password:

If the PDF file is password-protected, en-
ter the password in this field. Otherwise,
the file cannot be printed.

15.

Group password:

If a group password is assigned to Desk-
TopBinder Lite and this machine, enter
the group password in this field. Other-
wise, printing cannot start.

Using commands

You can print PDF files directly, using commands such as “ftp” “sftp”and “lpr”.

Note

❒

For details about UNIX commands, see Network Guide.

ANW014S

Summary of Contents for Aficio MP 6000












































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Aficio MP 6000

Reviews:

Related manuals for Aficio MP 6000

Brands by name

Popular brands

Ricoh Aficio MP 6000, Operating Instructions Manual

Search results

Summary of Contents for Aficio MP 6000

Reviews:

Related manuals for Aficio MP 6000

Brands by name

Popular brands