Ricoh Aficio MP 6000, Operating Instructions Manual

Page: 777 / 907

14
Setting the Paper Size Using the Control Panel
Follow the procedure below to set the machine using the control panel when
loading standard size paper onto the bypass tray.
Important
❒
The following procedures are not required if you select
[
Driver / Command
]
from
[
Bypass Tray Setting Priority
]
in
[
System
]
of
[
Printer Features
]
. In that case,
set the paper size using the printer driver. For details, see General Settings
Guide.
❒
If you select
[
Machine Settings
]
from
[
Bypass Tray Setting Priority
]
in
[
System
]
of
[
Printer Features
]
(see “System Settings”, General Settings Guide), the settings
made using the control panel have priority over the printer driver settings.
❒
If the printer driver is not used, select
[
Machine Settings
]
from
[
Bypass Tray Set-
ting Priority
]
in
[
System
]
of
[
Printer Features
]
(see “System Settings”, General Set-
tings Guide). Set paper size using the control panel.
A
Press the
{
User Tools/Counter
}
key on the control panel.
B
Press
[
System Settings
]
.
C
Press the
[
Tray Paper Settings
]
tab.
D
Press
[
Printer Bypass Paper Size
]
.
E
Select the paper size.
F
Press
[
OK
]
.
G
Press the
{
User Tools/Counter
}
key.
The initial screen appears.
Note
❒
When loading OHP transparencies or thick paper, set paper size and paper
type.
❒
For printer driver settings, see the printer driver Help.