Ricoh Aficio MP 6000, Operating Instructions Manual

Page: 553 / 907

Transmission
84
1
Searching for a Destination in the Address
Book
Use this function to search for a destination registered in the destination list or
on the LDAP server.
Important
❒
To search for a destination from an LDAP server, the LDAP server must be
registered in advance. For details about registering LDAP servers, see “Sys-
tem Settings”, General Settings Guide.
Note
❒
Press [ Fax ] or [ Internet Fax ] on the Search Destination screen to switch the
transmission type between fax/IP-Fax and Internet Fax.
❒
The search returns only destinations whose first characters match the entered
characters.
❒
A warning message appears if the search returns more than the maximum
number of destinations you can search for at a time. Press
[ Exit ] and change
the destination name to view fewer destinations.
❒
For the maximum number of destinations you can search at a time, see “Max-
imum Values”.
❒
Although one user can program multiple e-mail addresses, only one address
can be retrieved by the search. The address retrieved by the search depends
on the searching method supported by the LDAP server. However, the ad-
dress programmed first is normally retrieved.
Reference
p.276 “Maximum Values”
“System Settings”, General Settings Guide