Ricoh Aficio MP 6000 Operating Instructions Manual Download

Page: 106 / 907

Checking Machine Status and Settings

Checking Machine Status and Settings

You can check the machine's system status.

❖

Maintenance Info

You can check the following items under

[

Maintenance Info

]

•

[

Remaining Toner

]

Displays the amount of remaining toner.

•

[

No Staples

]

Displays the amount of remaining staples.

•

[

Punch Receptacle Full

]

Displays whether the hole punch receptacle is full.

•

[

Paper Tray

]

Displays the paper type and size loaded in the paper tray.

•

[

Output Tray Full

]

Displays whether the output tray is overloaded.

•

[

Original Misfeed

]

Displays state of and solutions for original misfeeds.

•

[

Paper Misfeed

]

Displays state of and solutions for paper jams.

•

[

Cover Open

]

Indicates whether front cover, duplex unit, etc, is open.

❖

Data Storage

You can check the following items under

[

Data Storage

]

•

[

HDD Remaining Memory

]

Displays the amount of available hard disk drive memory.

•

[

HDD File(s)

]

Displays the total number of jobs stored in the hard disk drive.

•

[

Print Job(s)

]

Displays the number of jobs for Hold print/Stored print/Locked
print/Sample print.

•

[

Fax TX / RX File(s)

]

Displays the number of TX standby files, Print memory lock files, Recep-
tion print files, and other files stored in the hard disk drive.

•

[

Memory Erase Status

]

Displays the state of the memory data.

Summary of Contents for Aficio MP 6000












































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Aficio MP 6000

Reviews:

Related manuals for Aficio MP 6000

Brands by name

Popular brands

Ricoh Aficio MP 6000, Operating Instructions Manual

Search results

Summary of Contents for Aficio MP 6000

Reviews:

Related manuals for Aficio MP 6000

Brands by name

Popular brands