Ricoh Aficio MP 2352 Operating Instructions Manual Download Page 83

Page: 83 / 236

When the booklet finisher is attached:

Press [OK].

Enter the number of copies with the number keys.

Place the originals, and then press the [Start] key.

• When placing originals on the exposure glass, start with the first page to be copied. When placing

originals in the ADF, set so that the first page is on the top.

• When placing originals on the exposure glass, or in the ADF using the Batch mode, press the [ ]

key after all the originals have been scanned.

• For details about paper sizes and orientations that can be shifted when delivered to the shift tray,

see “Sort”.

• p.74 "Sort"

Staple

Each copy set can be stapled together.

Finishing

Summary of Contents for Aficio MP 2352













































































































































































































































Search results

Summary of Contents for Aficio MP 2352

Reviews:

Related manuals for Aficio MP 2352

Brands by name

Popular brands

Ricoh Aficio MP 2352, Operating Instructions Manual

Search results

Summary of Contents for Aficio MP 2352

Reviews:

Related manuals for Aficio MP 2352

Brands by name

Popular brands