Ricoh Aficio MP 2352 Operating Instructions Manual Download Page 40

Page: 40 / 236

Press [Paper Size].

Select the paper size.

Press [OK] twice.

Place the originals, and then press the [Start] key.

• Steps 2 to 4 are not necessary if the size displayed on the key for tray 1 and that of the paper

loaded in tray 1 are the same.

Copying onto Custom Size Paper from Tray 1

Makes copies onto custom size paper from tray 1.

• The Duplex function cannot be performed on custom size paper. If [1 Sided 2 Sided] is selected,

cancel the setting.

• Paper will be delivered automatically to the internal tray.

Select tray 1, and then press the [ ] key.

2. Basic Copying

Summary of Contents for Aficio MP 2352













































































































































































































































Search results

Summary of Contents for Aficio MP 2352

Reviews:

Related manuals for Aficio MP 2352

Brands by name

Popular brands

Ricoh Aficio MP 2352, Operating Instructions Manual

Search results

Summary of Contents for Aficio MP 2352

Reviews:

Related manuals for Aficio MP 2352

Brands by name

Popular brands