Ricoh Aficio MP 161 Scanner Reference Download Page 47

Page: 47 / 128

Before Sending Scan Files by Scan to Folder

Sending scan files to NetWare server

This machine

You can send scan files to NetWare fold-
ers. To send scan files to NetWare fold-
ers, use the NCP protocol.

NetWare server

You can use this server to share files over
the network via NetWare. By sending im-
age data to the server, images can be
stored on the server.

Client computer

To download images, a computer must
be running the NetWare client and be
logged onto the server.

Preparation for Sending by Scan to Folder

This section explains the preparation and settings for sending scan files by Scan to Folder.

Important

❒

Files can be sent to shared folders on client computers.

❒

Files can also be sent to FTP servers if any exist on the network.

❒

Files can also be sent to NetWare servers if any exist on the network.

Connect the machine to the network.

Connect the machine to the network using an Ethernet cable or wireless LAN
(IEEE 802.11b).

Make the necessary network settings in

[

System Settings

]

If you have connected the machine to the network using an Ethernet cable,
make the following settings. For details, see General Settings Guide.
• Specify the machine’s IPv4 address and subnet mask.
• Specify the IPv4 gateway address.
• In

[

Effective Protocol

]

, enable

[

IPv4

]

• To send files to shared folders, enable

[

SMB

]

[

Effective Protocol

]

. To send

files to NetWare folders, enable

[

NetWare

]

[

Effective Protocol

]

ZZZ511S

Summary of Contents for Aficio MP 161

































































































































Search results

Summary of Contents for Aficio MP 161

Reviews:

Related manuals for Aficio MP 161

Brands by name

Popular brands

Ricoh Aficio MP 161, Scanner Reference

Search results

Summary of Contents for Aficio MP 161

Reviews:

Related manuals for Aficio MP 161

Brands by name

Popular brands