Various Scan Settings
94
5
B
Press the
{U}
or
{T}
key to select
[
Scan Size
]
, and then press the
{
OK
}
key.
C
Press the
{U}
or
{T}
key to select the scan size in the list, and then press the
{
OK
}
key.
"Programmed" appears, and then the Send Options screen reappears.
D
Press the
{
Escape
}
key.
Note
❒
If a template size is selected, the machine scans originals at the selected size
regardless of the actual size of originals. If an original is smaller than the
selected size, the machine applies margins to the scan area.
❒
If
[
Custom Size
]
is selected, the dimensions of the scan area (width and
length) can be specified in inch.
Specifying Custom Size
This section explains how to specify a custom size.
To scan a custom size original, measure its width and length, and enter these fig-
ures as the
[
Horiz.
]
and
[
Vert.
]
settings.
The following figure shows the
[
Horiz.
]
and
[
Vert.
]
of an original.
❖
Placing an original in the ARDF
1.
Vertical
2.
Horizontal
ALO031S
