Ricoh Aficio MP 1100 Operating Instructions Manual Download Page 93

Page: 93 / 297

System Settings on Main and Sub-machines

❖

Interleave Print

• The set values of the main and sub-machines do not affect the connect

copy.

❖

Output: Copier

• The main and sub-machines follow their respective set values.

❖

Output: Document Server

• The main and sub-machines follow their respective set values.

❖

Output: Printer

• The main and sub-machines follow their respective set values.

❖

ADF Original Table Elevation

• The main machine follows the values that are set in it. The set values of the

sub-machines do not affect the connect copy.

❖

System Status/Job List Display Time

The main and sub-machines follow their respective set values.

❖

Key Repeat

• The main and sub-machines follow their respective set values.

❖

Z-fold Position

• The main and sub-machines follow their respective set values.
• Make the same settings on both machines.

Timer Settings

How the defaults in the Timer Settings of copying of the main and sub-machines
are used in connect copy will be explained.

❖

Auto Off Timer

• The main machine follows the values that are set in it. The set values of the

sub-machines do not affect the connect copy.

❖

Energy Saver Timer

• The set values of the main and sub-machines do not affect the connect

copy.

• In Connect Copy mode, neither machine will enter Energy Saver modes

(Low Power mode, or Energy Saver mode).

Downloaded From ManualsPrinter.com Manuals

Summary of Contents for Aficio MP 1100










































































































































































































































































































Search results

Summary of Contents for Aficio MP 1100

Reviews:

Related manuals for Aficio MP 1100

Brands by name

Popular brands

Ricoh Aficio MP 1100, Operating Instructions Manual

Search results

Summary of Contents for Aficio MP 1100

Reviews:

Related manuals for Aficio MP 1100

Brands by name

Popular brands