Ricoh Aficio MP 1100 Operating Instructions Manual Download Page 18

Page: 18 / 297

Connecting the Machine

Connecting to the IEEE 1394 Interface

Connect the IEEE 1394 interface cable to the IEEE 1394 interface board (optional).

Connect the IEEE 1394 interface cable to the IEEE 1394 port.

For IEEE 1394 (SCSI print) connection, plug the other end of the cable into
the interface connector on the host computer.

Make sure about the shape of the connector to the computer. Fasten the con-
nector securely to the computer.

Note

❒

Use the interface cable supplied with the IEEE 1394 interface board (op-
tional).

❒

Make sure the interface cable is not looped.

❒

Two interface ports are available for connecting the IEEE 1394 interface ca-
ble. Either is suitable.

❒

For details about installing the printer driver, see "Preparing the Machine"

Printer Reference

Reference

"Turning On the Power"

About this machine

"Preparing the Machine"

Printer Reference

Downloaded From ManualsPrinter.com Manuals

Summary of Contents for Aficio MP 1100










































































































































































































































































































Search results

Summary of Contents for Aficio MP 1100

Reviews:

Related manuals for Aficio MP 1100

Brands by name

Popular brands

Ricoh Aficio MP 1100, Operating Instructions Manual

Search results

Summary of Contents for Aficio MP 1100

Reviews:

Related manuals for Aficio MP 1100

Brands by name

Popular brands