Ricoh Aficio Color 4006 Operating Instructions Manual Download Page 85

Page: 85 / 228

Shift—Shifting the Image

Margin Adjustment—Adding Margins for Binding

You can make a margin by shifting the image to the left or right. This function is useful when you want to bind
copies.

Note

❐

You can change the width of the binding margin as follows:

❐

The margin width default is as follows. You can change this default setting with the user tools.

☛

see page 159.

❐

If you set too wide a margin, areas you do not want to delete might be erased.

Reference

For functions that cannot be used together with this function,

☛

see page 88.

Press the [Shift/Book] key.

Press the [Margin Adjustment] key.

Metric Version

Inch Version

0 - 20mm (in 1mm steps)

0" - 0.8" (in 0.1" steps)

Metric Version

Inch Version

•

Front: 0mm Left

•

Back: 0mm Right

•

Front: 0" Left

•

Back: 0" Right

GCTOJS1E

Summary of Contents for Aficio Color 4006





































































































































































































































Search results

Summary of Contents for Aficio Color 4006

Reviews:

Ricoh Aficio Color 4006, Operating Instructions Manual, Page: 85 / 228

Search results

Summary of Contents for Aficio Color 4006

Reviews: