manualshive.com logo in svg

Ricoh Aficio Color 4006, Operating Instructions Manual, Page: 67 / 228

Share
Download
Ricoh Aficio Color 4006 Operating Instructions Manual Download Page 67

54

Program—Storing and Recalling Your Copy Settings in Memory

You can store up to five frequently used copy job settings in machine memory and recall them for future use.

Note

❐

If you want to change the stored programs, store another program again.

Storing Your Settings

1

Set the copy settings you want to put into
memory.

2

Press the  Program  key.

3

Press the [Program] key.

4

Select the program number you want to store
the settings in.

Note

❐

If this program number is already being used, the ma-
chine asks whether you wish to overwrite it or not. Press
the [Yes] or [No] key.

Recalling Your Settings

1

Press the  Program  key.

Note

❐

If you want to recall Area Edit settings stored in a pro-
gram, press the [Area Editing] key then press the  Pro-
gram  key.

❐

After you recall the Area Edit settings stored in a pro-
gram, you can change them. However, you can not
add or delete the Area/Group.

2

Press the [Recall] key.

3

Select the program number you want to recall.
The stored settings are displayed.

Note

❐

Only programs with 

m

 contain a program.

4

Set your originals, then press the   Start  key.

Basic Operation

Summary of Contents for Aficio Color 4006





































































































































































































































Reviews:

No comments