manualshive.com logo in svg

Ricoh Aficio Color 4006, Operating Instructions Manual, Page: 53 / 228

Share
Download
Ricoh Aficio Color 4006 Operating Instructions Manual Download Page 53

40

Basic Operation

3

Select the color.

Note

❐

You can select the color density level.

4

Press the [OK] key.

5

Set your originals, then press the  Start  key.

Twin color mode

This function makes copies with black parts in the selected color and other parts in the other selected color.

Reference

For copy samples, 

☛

 see page 12.

Note

❐

You can have colored areas copied in one of the following colors:
Red, Green, Blue, Yellow, Cyan, Magenta, Yellow Green, Orange, Marine Blue, Beige, Pink, Purple and Use Colors

❐

You can have black parts copied in one of the following colors:
Red, Green, Blue, Yellow, Cyan, Magenta, Yellow Green, Orange, Marine Blue, Beige, Pink, Purple and User Colors

1

 Press the [Twin Color] key.

2

Select the color you want to copy in for the color
parts of the original.

3

If you want to change the black parts, press the
[Change Black] key.

Note

❐

If you don’t want to change the black parts, go to step 5.

4

Select the color you want to copy in for the black
parts of the original. Then press the [OK] key.

5

Press the [OK] key.

6

Set your originals, then press the  Start  key.

Summary of Contents for Aficio Color 4006





































































































































































































































Reviews:

No comments