Ricoh Aficio Color 4006, Operating Instructions Manual, Page: 133 / 228

120
Selecting Modes for Designated Ar eas
Selecting Modes for Outside Designated Areas
Reference
The available modes for area editing depend on the area shape.
☛
see page 128.
For functions that cannot be used together in area editing,
☛
see page 128.
More than one mode can be set, however, there are some limitations,
☛
see page 128.
The modes that can be set for outside areas as follows:
•
Color/Image Adjustment: Copy Image Density, Color Mode, Original Type, Image Adjustment, Color Adjustment,
Color Balance Adjustment
•
Color Creation: Color Conversion, Color Erase, Color Background, Paint
Note
❐
Color/Image Adjustment’s default setting:
•
Image Density - Manual Image Density
•
Color Mode - Black & White
•
Original Type - Auto Text/Photo
❐
You can change the default settings.
☛
see page 151.
❐
The way to set modes is basically the same as for the entire image. For details, refer to each page.
•
To fill an area with a selected color, select the Paint.
•
Color Mode
☛
see page 38.
•
Image Density
☛
see page 37.
•
Image Adjustment
☛
see page 96.
•
Original Type
☛
see page 41.
•
Color Balance Adjustment
☛
see page 92.
•
Color Adjustment
☛
see page 95.
•
Color Erase
☛
see page 79.
•
Color Conversion
☛
see page 77.
•
Save Area
☛
see page 118.
•
Color Background
☛
see page 80.
•
Delete Area
☛
see page 117.
Area Shapes
Basic modes
1
Designate the areas you wish to modify.
Note
❐
For designating areas,
☛
see page 106.
2
Press the [Outside Area] key.
3
Press the [Col./Image Adjust.] or [Color Crea-
tion] key.