Ricoh Aficio CL5000, Maintenance Manual

Page: 26 / 80

Replacing Consumables and Maintenance Kit
22
2
Fuser Oil Type 5000
R
CAUTION:
Replace the fuser oil unit when the
following message appears on the
panel display.
Check the contents of the box for the
following items:
❖
❖ ❖
❖
Fuser Oil Unit
❖
❖ ❖
❖
Gloves
❖ ❖ ❖ ❖
Disposal Bag
❖ ❖ ❖ ❖
Maintenance Guide
AAAA
Turn off the printer power.
Important
❒
To prevent a burn, be sure to
wait about 30 minutes after the
power is turned off until the
fusing unit cools down before
touching the fusing unit.
BBBB
Open the front cover slowly by
pulling down from the two areas
on the left and right.
• The inside of the machine be-
comes very hot. Do not touch the
parts with a label indicating "
v
"
(means hot surface). Touching
"
v
" (means hot surface) could
result in a burn.
• The fusing unit becomes very
hot. When installing the new fus-
ing unit, turn off the printer and
wait about 30 minutes. After that,
install the new fusing unit. Not
waiting for the unit to cool down
can result in a burn.
• Do not pull out the fusing unit
forcefully. It may cause the unit
to fall and result in an injury.
• When touching the fusing unit,
do not touch any areas other
than the handle as it may cause
a burn.
Replace
Fuser Oil Unit
ZESH400J