Ricoh Aficio CL3000, Maintenance Manual

Page: 305 / 691

Operating Instructions Administrator Reference
119
*1
The "Sample Print" menu and the "Locked Print" menu appear only when the optional Printer Hard Disk
is installed.
*2
The “HDD Format” and the "Spool Printing" menu appears only when the optional Printer Hard Disk is
installed.
*3
ROM Update is not currently used.
*4
The "WL.LAN Signal" menu appears only when "IEEE 802.11b" is selected in "LAN Type" in the Host
Interface menu.
*5
While the printer is On Line, press the
{{{{
Enter #
}}}}
key, and then press the
{{{{
Escape
}}}}
key, finally press the
{{{{
Menu
}}}}
key. You can access the "Menu Protect", "Series Prnt.Job" "Letterhead Mode", "E.Saver2
OnOff", "USB Setting" on the panel display.
*6
The “Duplex” menu appears only when the optional AD440 is installed.
*7
The “Network Setup” menu appears only when the optional Network Interface Unit or 802.11b Interface
Unit is installed.
*8
The “IEEE 1394 Setup” menu appears only when the optional 1394 Interface Unit is installed.
*9
The “IEEE 802.11b” menu appears only when the optional 802.11b Interface Unit is installed.
PCL Menu
⇒
p.171 Orientation
Form Lines
Font Source
Font Number
Point Size
Font Pitch
Symbol Set
Ext. A4 Width
Append CR to LF
Language
⇒
p.177
Category Function Menu