manualshive.com logo in svg

Ricoh Aficio C3000, Operating Instructions Manual, Page: 277 / 292

Share
Download
Ricoh Aficio C3000 Operating Instructions Manual Download Page 277

Programs

267

7

Using a Program

Follow these steps to recall and use a registered program:

A

Make sure that the machine is in facsimile mode and the standby display
is shown.

If the standby display is not shown, press the 

{

Facsimile

}

 key.

B

Place the original.

C

Press the 

{

Program

}

 key.

D

Confirm that 

[

Recall

]

 is selected, and press the registered program number.

The standby display appears.
The programmed fax number appears and the registered settings are recalled.

E

Press the 

{

Start

}

 key.

The machine starts to scan the original.
Then, transmission starts with the recalled transmission settings.

Note

❒

Using the program causes the previous settings to be cleared.

❒

If you have no programmed destinations or scan settings as programs, se-
lect the program number, and then enter the fax number of the destination
and select the scan settings you require.

ALV006S

Summary of Contents for Aficio C3000





































































































































































































































































































Reviews:

No comments