manualshive.com logo in svg

Ricoh Aficio C3000, Operating Instructions Manual, Page: 243 / 292

Share
Download
Ricoh Aficio C3000 Operating Instructions Manual Download Page 243

233

6. Fax via Computer

This section explains how to use this machine's facsimile function from a com-
puter via a network.

Sending Fax Documents from Computers

You can send a document created with a Windows application from a computer
connected to the machine to another fax machine.
Connect computers to the machine via parallel port, LAN, IEEE 802.11b (wire-
less LAN), IEEE 1394 (IPv4 over 1394), or USB 2.0.
• To send a fax, simply select 

[

Print

]

 from the Windows application, then select

LAN-Fax as the printer, and then specify a destination. LAN-Fax enables pa-
perless faxing from your computer to the other destinations.

• In addition to sending faxes, the LAN-Fax Driver allows this machine to be

used for printing out documents prepared on a computer for proof checking. 

• To use the LAN-Fax Driver, connect this machine to a LAN and make the nec-

essary network settings, and then install the LAN-Fax Driver and the related
utilities on your computer.

Important

❒

Errors occurring when the machine is used as a LAN-Fax will not be dis-
played on the computer. Check for errors by using a Web Image Monitor. See
Web Image Monitor help.

❒

USB connection is not available when using the LAN-Fax function on Win-
dows 98.

❒

The facsimile function of this machine cannot be used with IPv6.

ALT007S

Summary of Contents for Aficio C3000





































































































































































































































































































Reviews:

No comments