manualshive.com logo in svg

Ricoh Aficio C3000, Operating Instructions Manual, Page: 217 / 292

Share
Download
Ricoh Aficio C3000 Operating Instructions Manual Download Page 217

Personal Boxes

207

4

E

If a password has been set for the box, enter the password, and then press 

[

OK

]

.

If you make a mistake, press 

[

Clear

]

 or the 

{

Clear/Stop

}

 key before pressing

[

OK

]

, and then try again.

To cancel entering a password, press 

[

Cancel

]

. The display returns to that of

step 

D

.

F

Press the 

{

Start

}

 key.

To stop printing, press 

[

Stop Printing

]

. The display returns to that of step 

D

.

To print a document in another Personal Box, repeat from step 

D

.

G

Press 

[

Exit

]

 twice.

The standby display appears.

Note

❒

If you print a Personal Box document, it is deleted.

❒

The passwords for Personal Boxes can be programmed under “General
Settings” in the Facsimile Features menu.

Reference

“Facsimile Features”, General Settings Guide

Confidential File Report

You can check whether a document was received to a Personal Box.

Note

❒

You can turn this function on or off with the User Parameters (switch 04, bit 0)
in the Facsimile Features menu.

Reference

“Facsimile Features”, General Settings Guide

Summary of Contents for Aficio C3000





































































































































































































































































































Reviews:

No comments