manualshive.com logo in svg

Ricoh Aficio C3000, Operating Instructions Manual, Page: 129 / 292

Share
Download
Ricoh Aficio C3000 Operating Instructions Manual Download Page 129

Requesting a Reception Notice

119

2

Requesting a Reception Notice

You can confirm sent documents were properly received using e-mail or the
Journal.
The receiver sends back a reception notice message. Once the reception notice
message is received, “OK” appears in the Result column of the Journal, allowing
the originator to verify the transmission was received.

Important

❒

The Reception Notice feature is only available if the receiver supports MDN
(Message Disposition Notification). 

A

Place the original, and then select the scan settings you require.

B

Press 

[

TX Mode

]

.

C

Press 

[

Reception Notice

]

 to highlight it.

D

Press 

[

OK

]

.

The standby display appears.
To check the settings, press 

[

TX Mode

]

.

E

Specify a destination, and then press the 

{

Start

}

 key.

Summary of Contents for Aficio C3000





































































































































































































































































































Reviews:

No comments