Setting Up
36
2
Installing the User Account
Enhance Unit TypeB
R
CAUTION:
Note
❒
Disposal should take place at an
authorized dealer or an appropri-
ate collection site. An IC2 lithium
battery is inside the User Account
Enhance Unit.
❒
If you are disposing the Unit, sepa-
rate the IC2 lithium battery from
the board and dispose of them ac-
cording to local regulations.
Important
❒
Be sure to touch a metal object be-
fore touching the User Account
Enhance Unit to discharge static
electricity. Even a small amount of
static electricity can damage the
unit.
❒
Do not subject the User Account
Enhance Unit to physical shocks.
AAAA
Check the contents of the box.
❖
❖
❖
❖
User Account Enhance Unit
❖
❖
❖
❖
One Screw
BBBB
Turn off the power switch and
unplug the power cable.
CCCC
Remove two screws that are fas-
tening the Controller Board on
the back of the printer using pro-
vided screwdriver.
Reference
S ee p.22 “H ow t o Us e th e
Screwdriver”.
The removed screws will be used
later to fasten the Con troller
Board.
•
Do not place the IC2 lithium bat-
tery near or into fire, or it will ex-
plode and cause a burn.
•
The User Account Enhance Unit
installed on the controller has a
IC2 lithium battery which can ex-
plode if replaced incorrectly. Re-
place the User Account Enhance
Unit only with the indicated one.
ZDJP025J
Summary of Contents for Aficio AP3800C
Page 82: ...74 AE AE G060 MEMO...