Ricoh Aficio AP3800C, Setup Manual

Page: 12 / 84

Getting Started
4
1
Exterior: Rear View
1.
Ventilator and Dustproof Filter
This hole helps to keep components in-
side the printer from overheating. Do not
block or obstruct the ventilator. A mal-
function may occur due to overheating.
Remove the ventilator to replace the in-
ternal dustproof filter.
2.
Connector
Connect the main power cable, cables
from options, etc. to the appropriate port.
3.
Duplex Unit Port
Connect the cable for the Duplex Revers-
al Unit to this port.
4.
4-bin Mailbox/2 Tray Finisher
Port
Connect the cable for the 4-bin Mailbox
or the 2 Tray Finisher to this port.
5.
Power Port
Connect the power cable to this port and
the other cable end to the wall outlet.
6.
Upper Left Cover
Open this cover to remove misfed paper
or when replacing the Fusing Unit.
7.
External Tray
Printed output is stacked here with the
print side up.
8.
Ventilators
These holes help to keep components in-
side the printer from overheating. Do not
block or obstruct the ventilators. A mal-
function may occur due to overheating.
1
2
3
4
5
6
7
8
ZDJX702J