1. Copy tray (option)
Completed copies are delivered here. Regarding
the capacity of the tray,
☛
see page 166.
2. Main switch
Switches the copier between on and standby con-
ditions.
3. Auto response
(human) sensor
When someone comes close to the copier, it will
automatically switch from Low Power mode to
standby mode.
4. Platen cover (option)
Lower this cover over originals for copying.
5. Exposure glass*
Position originals here face down for copying.
*After turning off the main switch, the exposure glass might be hot
because of the anticondensation function. This is not a problem.
6. Front cover
Open to access the inside of the copier.
7. Unit for two-sided
copies (Duplex unit)
Makes two-sided copies.
8. Paper tray
Holds 500 sheets of copy paper.
9. Bypass tray
Use to copy onto OHP sheets, adhesive labels,
translucent paper, post cards, and non-standard
size paper.
10. Large capacity tray
Holds 1,000 sheets of copy paper.
11. Right cover of
the optional tray unit
Open to remove misfed paper.
12. Key counter holder
Insert the optional key counter here.
13. Operation panel
Operator controls and touch panel are located
here.
☛
See the next page.
14. Toner bottle
Replace the toner bottle when "
f
Add Toner"
is displayed on the display.
☛
See page 120.
15. Fusing unit
Fuses the copy image to the paper. When ac-
cessing the inside of the copier, use caution.
This unit may be very hot.
na-2
COPIER EXTERIOR & INTERIOR
5