Temporarily Stopping One Job To Copy
Something Else (Interrupt)
You can make urgently needed copies
during a multicopy run by pressing the
Interrupt key. The interrupted copy job
settings are stored in the machine’s
memory. After interrupt copying is com-
pleted, press this key again to recall the
previous copy job settings.
❐
In Interrupt mode,
&
is displayed on
the display.
❐
If you use this function with the op-
tional document feeder, you might
have to reset originals not to be copied
after interrupt copying is finished. Fol-
low the instructions on the display.
❐
Regarding the functions that cannot
be used together with this function,
☛
see page 105.
Recalling Job Settings (Job Recall)
The previous copy job settings before
auto reset or Low Power mode can
be recalled by pressing the Job Re-
call key. When the previous copy job
setting is saved, the Job Recall indi-
cator is lit.
na-5
s/Energy Saver
Interrupt
Program
Job Recall
Clear Mod
C
BASIC OPERATIONS
53