manualshive.com logo in svg

Ricoh Aficio 400, User Manual, Page: 109 / 170

Share
Download
Ricoh Aficio 400 User Manual Download Page 109

Copier’s Condition

Action

Staples do not come out at all.

After loading a new staple cartridge, staples might not
be ejected the first few times you try to use the stapler. 

➠

 Try again.

A few sheets might not be stapled. To correct this, try
turning over the paper stack in the tray unit. If there is
no improvement, change to copy paper with less curl.

There are jammed staples in the stapler.

➠

  Remove jammed staples. 

☛

 See page 125.

Misfeeds occur frequently.

Is the right kind of paper in the paper tray?

➠

 Paper size and weight must be within the

specification for this copier.

Is folded, wrinkled, damp, or curled paper in the paper
tray?

➠

  Always use dry, undamaged paper.

Is the paper properly set in the paper tray?

➠

  Always load paper correctly.

Are there any pieces of misfed paper or other foreign
objects in the machine?

➠

  Make sure that the paper path is completely clear of

paper and other material after a misfeed.

Copy paper size setting is not correct.

➠

  Set the proper paper size using the user tools.

☛

 See page 138.

❐

If you cannot correct the problem by taking the above actions, please contact
your service representative.

na-7

IF YOUR COPIER DOES NOT OPERATE AS YOU WANT

111

Summary of Contents for Aficio 400











































































































































































Reviews:

No comments