Ricoh Aficio 350e, Operating Instructions Manual, Page: 39 / 46

Settings You can Change with the User Tools
23
2
System Settings
3
/
7
Menu Description
09. Energy Saver Mode The machine enters Energy Saver mode in the following
cases:
• If you hold down the
{
Clear Modes/Energy Saver
}
key for
about a second or more.
• When the preset time selected with the Low Power Tim-
er has passed.
Reference
See “08. Low Paper Timer” in
⇒
P.22 “System Settings
2
/
7
” .
In Energy Saver mode, power consumption is saved as
shown below, as compared with Stand-by mode.
• Level 1 (default): Saving about 20%
• Level 2: Saving about 25%
Warm-up time required for Energy Saver mode to return to
the ready condition is as follows:
• Level 1 (default): About 3 seconds
• Level 2: About 10 seconds
Note
❒
Default: Level 1
❒
The values above are references applicable to Type 1
(mainframe only).
10. Auto Off Timer The machine turns itself off automatically to conserve ener-
gy after your job is finished, after the selected time. This
function is called “Auto Off ”. The time can be set from 1 to
240 minutes.
Note
❒
Default: 60 minutes
❒
Auto Off might not be effective when the machine is in
the following conditions:
• An error message is displayed.
• The remaining memory space for facsimile or scan-
ner mode is less than 100%.
❒
To return to the ready condition from Auto Off, the ma-
chine requires the same warm-up time as the time for be-
coming ready after its power is turned on.
❒
When the machine receives a fax or printer data in Auto
Off mode, it automatically prints the fax or the printer
data.