manualshive.com logo in svg

Ricoh Aficio 3030, Operating Instructions Manual, Page: 227 / 310

Share
Download
Ricoh Aficio 3030 Operating Instructions Manual Download Page 227

Printing/Deleting Received and Stored Documents (Print/Delete Stored RX File)

217

4

Printing/Deleting Received and Stored 
Documents (Print/Delete Stored RX File)

You can print documents that are received and stored on the hard disk. You can
also delete unwanted documents.

Important

❒

The optional HDD unit and printer/scanner functions are required.

❒

Make the settings for received and stored documents in “Reception File Set-
ting” in the Facsimile Features menu before using this function.

Note

❒

If you have selected to store received documents and specified an e-mail ad-
dress for notification of receipt, fax reception notification can be sent to that
e-mail address.

❒

For the maximum number of received documents you can store on the ma-
chine's hard disk, see “Maximum Values”.

❒

You can view and print received and stored documents using a Web Image
Monitor or DeskTopBinder.

Reference

p.273 “Viewing Fax Information Using a Web Browser”
p.289 “Maximum Values”
“Facsimile Features”, General Settings Guide
DeskTopBinder's manuals and Help

Summary of Contents for Aficio 3030























































































































































































































































































































Reviews:

No comments