Printing Options
185
3
Where Incoming Documents Are Delivered - Output Tray
You can specify the output tray or output position to facilitate separation of re-
ceived documents.
Specifying tray for lines
Use this function to specify the output tray for each line port.
You can specify the document feeding tray for each port (telephone, Internet
Fax, IP-Fax). For example, you can specify documents received through the G3-
1 port to be fed to the “Internal Tray 1” and documents received through the G3-
2 port to be fed to the “Internal Tray 2”, facilitating separation of files. You can
also set the machine to output Internet Fax documents and ordinary faxes onto
different trays.
Important
❒
The optional extra G3 interface unit is required.
Note
❒
To use this function, specify the port and destination using
[
Specify Tray for
Lines
]
in the Facsimile Features menu.
Reference
“Facsimile Features”, General Settings Guide
Tray Shift
Use this function to shift the output position for each document, so you can sep-
arate received documents easily.
When the optional finisher unit is selected for fax output, you can use the Tray
Shift function whenever a fax or report is printed.
This is useful for separating faxes stacked in the finisher output tray. For exam-
ple, if the previous incoming fax was output to the left, the next incoming fax
will be output to the right and vice-versa.
Important
❒
The optional finisher or shift sort tray unit is required.
Note
❒
You can turn this function on or off with the User Parameters (switch 19, bit 0)
in the Facsimile Features menu.
❒
When the optional 500-sheet finisher is installed, B5
L
cannot be output.
Reference
“Facsimile Features”, General Settings Guide
