Ricoh Aficio 2105 Operating Instructions Manual Download Page 91 | Manualshive

Page: 91 / 114

Ricoh Aficio 2105 Operating Instructions Manual Download Page 91

85

7. Using the Network TWAIN

Scanner Function

This chapter describes the operations for scanning originals with the network
TWAIN scanner using DeskTopBinder V2 Lite. In addition, the preparation for
using the network TWAIN scanner and some functions of the TWAIN driver are
introduced.

Preparation for Using the Network TWAIN
Scanner

To use the machine as a network TWAIN scanner, the preparation described be-
low is required.

Connect the machine to the network with an Ethernet cable,
IEEE 1394 (optional) cable, or use a wireless LAN (optional).

See

Network Guide

.

Check the network settings in System Settings, and change if re-
quired.

See

Network Guide

.

On the client computers, install the software required for using
the network TWAIN scanner functions, such as a TWAIN driver
and DeskTopBinder V2 Lite.

See p.25 “Software for Using a Network TWAIN Scanner”.

1

Connect to Network

2

Make System Settings

3

Install Software

«
...
89
90
91
92
93
...
»

Summary of Contents for Aficio 2105



















































































































Reviews:

No comments