manualshive.com logo in svg

Ricoh Aficio 2075, Operating Instructions Manual

Share
Download
Ricoh Aficio 2075 Operating Instructions Manual Download Page 50

Storing Files

42

4

Storage Procedure

You can scan and store files.

AAAA

Press the 

{{{{

Scanner

}}}}

 key.

Note

❒

The illustration is an example.
The actual appearance may be
different.

BBBB

Make sure that no previous set-
tings remain.

Note

❒

If a previous setting remains,
press the 

{{{{

Clear Modes

}}}}

 key.

CCCC

Place originals.

Reference

The procedure for placing origi-
nals is the same as that for plac-
ing originals for copying. For
details about placing originals,
see “Placing Originals”, 

Copy

Reference

.

DDDD

Make settings for original orien-
tation, the sides scanned, and oth-
er settings if necessary.

Reference

p.73 “Making the Settings Relat-
ed to the Orientation of the
Original and Scanned Sides”

EEEE

Make the scan settings.

Reference

There are two ways to specify
scan settings, as described be-
low:
• Configure each setting for

scanning. For details, see
p.71  “Specifying Scan Set-
tings”.

• Recall registered settings. For

details, see p.79 “Programs”.

FFFF

Make the settings for storing scan
files.

A

Press 

[

Store File

]

.

B

Press 

[

Store Only

]

.

Note

❒

To store and deliver scan
files, press 

[

Send & Store

]

. See

p.26 “Simultaneous Storage
and Sending by E-mail”, p.39
“Simultaneous Storage and
Sending by Scan to Folder”,
or p.63 “Simultaneous Stor-
age and Delivery”.

❒

[

Store Only

]

 cannot be pressed

if a destination or sender is
selected.

C

Press 

[

OK

]

.

ZZZ607S

Summary of Contents for Aficio 2075



































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands