Ricoh Aficio 1035 Series, Operating Instructions Manual, Page: 63 / 84

Settings You Can Change with the User Tools
45
3
• Dlvry Failure File
If a received fax documents cannot be sent to the ScanRouter V2 Lite/Pro-
fessional, the documents is stored in the machine's memory. To print this
stored data select “Print File”, to delete the data select “Delete File”.
Note
❒
If the machine can send data to the ScanRouter V2 Lite/Professional,
data is sent automatically.
❒
If you delete the data, you will not be able to distribute or print the data.
❖
❖ ❖
❖
Recall Interval Time
Specifies the interval the machine should wait before resending data or a doc-
ument, if a data could not be sent to the ScanRouter V2 Lite/Professional.
Note
❒
Default: 300 Seconds
❒
Enter an interval within the range of “60 -999 seconds” (in one second in-
tervals) with the number keys.
❒
This setting is for the Scanner function. The distribution of received fax
documents will still be performed.
❖
❖ ❖
❖
Number of Recalls
Note
❒
Default: Yes
❒
Enter a number of times within the range of “1-99” with the number keys.
❒
The default setting is 3 times.
❒
This setting is for the Scanner function. The distribution of received fax
documents will still be performed.
Key Operator Tools
1
/
2
If an access code has been set, you cannot use the Key Operator Tools unless you
enter the access code (max. 8 digits).
⇒
P.46 “Key Operator Code”
Reference
For details about user codes,
⇒
P.48 “User Code”
❖ ❖ ❖ ❖
User Code Management
Allows you to control who uses the machine by setting user codes for users.
Note
❒
Default: Copier/No, Document Server/No, Facsimile/No, Scanner/No, Printer/
No
❒
By using “Auto Registration” for the printer you can keep a print log for
each user code entered from the driver.