User Tools (System Settings)
44
3
File Transfer
Be sure to perform these settings if you are using ScanRouter V2 Lite/Profes-
sional.
Note
❒
The optional ScanRouter V2 Lite/Professional is required for distributing re-
ceived fax documents.
❖
❖
❖
❖
Delivery Server IP Address
Specifies the IP address of the ScanRouter V2 Lite delivery server for distrib-
uting documents or data from the machine.
Note
❒
Default:
000.000.000.000
❒
Press
[
←
←
←
←
]
or
[
→
→
→
→
]
to move between each group of three numbers.
❒
If you make a mistake, press the “Clear” key and enter the correct number.
❖
❖
❖
❖
Fax RX File Transmission
• Setting per Line
Specifies whether, or not, received fax documents should be sent to the
Ridoc Document Router for each of the fax lines.
Note
❒
Default:
G3 Port 1/Do not Deliver, G3 Port 2/Do not Deliver, G3 Port 3/Do
not Deliver
• Print at Delivery
Specifies whether, or not, received fax documents that are sent to the Scan-
Router V2 Lite/Professional should also be printed by the machine at the
same time.
Note
❒
Default:
No
• File to Deliver
Specifies whether only received fax documents that include delivery codes
(documents with an ID and F code) should sent to the ScanRouter V2 Lite/
Professional, or all received fax documents.
Note
❒
Default:
All Files