Transmission
48
1
Sending by IP-Fax
This section explains how to specify a destination using IP-Fax transmission.
When using IP-Fax transmission, specify the IP-Fax destination (IPv4 address,
host name, or alias telephone number) in place of the fax number.
Important
❒
To use IP-Fax functions, the Function Upgrade Option must be installed.
A
Press
[
]
to switch the destination to IP-Fax destination.
When using a gatekeeper server, select .
When using a SIP server, select .
B
Press
[
Manual
]
.
C
Enter the IP-Fax destination, and then press the
{
OK
}
key.
To specify a destination using a Quick Dial key, see “Using the Quick Dial
Keys”.
If you enter an incorrect character, press the
{
Clear/Stop
}
key. Then, re-enter
the characters correctly.
To change the IP-Fax destination after pressing the
{
OK
}
key, press
[
EditDest
]
,
re-enter an IP-Fax destination, and then press the
{
OK
}
key.