manualshive.com logo in svg

Ricoh Aficio 1027, Facsimile Reference Manual, Page: 151 / 198

Share
Download
Ricoh Aficio 1027 Facsimile Reference Manual Download Page 151

Checking the Transmission Result (TX File Status)

143

4

Note

❒

You can switch this report on or off in the User Parameters (switch 03, bit 5)
in the Fax Features menu.

❒

To view the report without text disruption, select a font of even character
width in your e-mail application's settings.

❒

You can set whether or not to display a destination with the User Parameters
(switch 04, bit 4) in the Fax Features menu. 

❒

If the page was sent successfully, the Page column gives the total number of
pages sent successfully.

Reference

“Fax Features”, General Settings Guide

Communication Failure Report

This report is printed when a document could not be successfully transmitted
with Memory Transmission.
If the machine is set up to print a Communication Result Report, this report is
not printed. Use it to keep a record of failed transmissions so you can send them
again.

Note

❒

You can select whether the Communication Failure Report is automatically
printed using the User Parameters (switch 04, bit 1) in the Fax Features menu.

❒

This report is only printed if the Communication Result Report is turned off
and a document could not be successfully transmitted with Memory Trans-
mission. 

❒

You can select whether to include part of the original image on the report with
the User Parameters (switch 04, bit 7) in the Fax Features menu.

❒

You can set whether or not to display a destination with the User Parameters
(switch 04, bit 4) in the Fax Features menu. 

❒

You can set whether or not to display a sender name with the User Parame-
ters (switch 04, bit 5) in the Fax Features menu.

❒

The Page column gives the total number of pages. The Not Sent column gives
the number of pages that could not be sent successfully.

❒

“Unprogrammed” indicates that the document could not be sent because the
forwarding destination is not programmed.

❒

“--” indicates that the Internet Fax document was sent to the mail server pro-
grammed in this machine. (However, this does not mean the e-mail was delivered.)

Reference

“Fax Features”, General Settings Guide

Summary of Contents for Aficio 1027







































































































































































































Reviews:

No comments