RELAY ROLLER AND POSITIONING PLATE MECHANISM
30 August, 2002
A763-18
2.9 RELAY ROLLER AND POSITIONING PLATE
MECHANISM
When the first sheet of paper comes to the booklet unit, the
booklet transport motor turns on to drive the relay roller [A].
The two relay rollers are out of contact with each other before
the paper comes. When the leading edge of the paper passes
trailing edge sensor 1, the relay roller solenoid is energized to
make the two relay rollers contact each other to transport the
paper to the positioning plate [B]. When the trailing edge of the
paper comes to the trailing edge sensor that the paper passes
last, the relay roller solenoid is de-energized. This solenoid
on/off cycle is done for each sheet of paper.
Before paper comes, the positioning plate moves up from the
home position to a position that is suitable for the selected
paper size in order that the middle of the paper just comes to
the stapling position.
The positioning plate motor drives the positioning plate using
pulse counts.
Only when the first sheet of paper reaches the positioning
plate, the positioning plate sensor [C] detects the paper.
A763D573.PCX
A763D574.PCX
A763D563.PCX
[B]
[A]
[A]
[B]
[C]
