Ricoh 9100DN - Aficio SP B/W Laser Printer, Software Manual

Page: 162 / 344

PS Menu
You can set conditions when using Postscript for printing.
Changing the PS menu
Follow the procedure below to change the setting for date format.
1. Press the [Menu] key.
The [Menu] screen appears.
2. Press the [ ] or [ ] key to display [PS Menu], and then press the [ Enter] key.
3. Press the [ ] or [ ] key to display [Data Format], and then press the [ Enter] key.
4. Press the [ ] or [ ] key to select [TBCP], and then press the [ Enter] key.
Wait two seconds. The [Data Format] screen appears.
5. Press the [Online] key.
The initial screen appears.
PS Menu parameters
This section explains about parameters that can be set on the Postscript menu.
Data Format
You can select the data format.
• Binary Data
• TBCP
This setting is effective when using a parallel, USB, or EtherTalk connection.
When you use a parallel or USB connection, the print job is canceled if binary data is sent from
the printer driver.
When you use an Ethernet connection, the print job is canceled if:
• The printer driver data format is TBCP and the data format selected using the control panel
is Binary Data.
• The printer driver data format is binary and the data format selected using the control panel
is TBCP.
• Default: TBCP
Resolution
4. Making Printer Settings Using the Control Panel
160
4