Transmission
22
1
If memory runs out while storing an original
If you run out of memory while storing an original (free space reaches 0%), the
message “
Memory is full. Cannot scan more. Transmitting only
scanned pages.
” is displayed. Press
[
Exit
]
to transmit stored pages only.
Note
❒
When this happens, only the scanned pages are sent. If you want to delete the
scanned pages and cancel transmission in this case, contact your service rep-
resentative.
Immediate Transmission
Immediate Transmission is possible with standard fax transmission and IP-Fax
transmission.
Important
❒
Internet Fax is executed in only Memory Transmission that starts transmis-
sion automatically after storing documents in memory. If you specify Imme-
diate Transmission in Internet Fax, the mode is switched to Memory
Transmission while an e-mail address is being entered.
❒
Group cannot be used for Immediate Transmission. You cannot send the
same document to multiple destinations (broadcasting). If you specify broad-
cast or transmission for a group, the machine changes automatically to Mem-
ory Transmission.
A
Make sure that
[
Immed. TX
]
is selected.
B
Place the original.
The original can be placed anytime before the
{
Start
}
key is pressed.
